Quick Connect Sockets & Plugs*

Safety Warnings

Improper selection or improper use of hose, fittings, assemblies, or related accessories (“Products”) can cause death, personal injury and property damage. Possible consequences of failure or improper selection or improper use of these Products include but are not limited to:

Fittings thrown off at high speed
High velocity fluid discharge
Explosion or burning of the conveyed fluid
Electrocution from high voltage electric power lines
Contact with suddenly moving or falling objects that are controlled by the conveyed fluid discharge
dangerously whipping hose
Contact with conveyed fluids that may be hot, cold, toxic or otherwise injurious
Sparking or explosion while spraying paint or flammable liquids
Injuries resulting from inhalation, ingestion or exposure to fluids

Before selecting or using ProPulse Products, it is important that you read and understand the following:

If you see “It” – Stop “It”

Failure to properly repair or replace hose after exposing braid or the reinforcement layer can cause death, personal injury, and property damage. Like each strand in a bridge cable, each reinforcement fiber plays an exact role in the ultimate burst strength of the hose. A minor slice or nick in the reinforcement can result in total hose failure.

The age of the hose does not matter! It is unfortunate, but even hose used one time can be damaged in severe applications. These hose must be immediately removed from service.

Hose Basics:

Never exceed the maximum working pressure
Never exceed the maximum working temperature
Never apply pressure to a damaged hose
High pressure hoses are designed to use specific fittings or tooling. Never use a different brand of fittings or tooling. Failure to do so can cause death, personal injury, and/or property damage.
A kinked, crushed, or blistered hose will eventually fail- do not risk injury. Immediately repair or remove hose from service.
Follow the pump/equipment manufacturers instructions for pressurized hose testing.