200 Series
Rubber Hydraulic Hose
200 Series | Hose Size | Hose I.D. (Max) | Hose O.D. (Max) | Working Pressure | Proof Pressure | Burst Pressure | Bend Radius | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ProPulse Hose Part Number | DN | Dash | Inch | MM | Inch | MM | Inch | BAR | PSI | BAR | PSI | BAR | PSI | MM | Inch |
200 - 04 | 6 | -4 | 1/4 | 7.0 | 0.28 | 15.7 | 0.62 | 400 | 5800 | 800 | 11600 | 1600 | 23200 | 100 | 3.94 |
200 - 05 | 8 | -5 | 5/16 | 8.5 | 0.33 | 17.3 | 0.68 | 350 | 5075 | 700 | 10150 | 1400 | 20300 | 115 | 4.53 |
200 - 06 | 10 | -6 | 3/8 | 10.1 | 0.40 | 19.7 | 0.78 | 330 | 4785 | 660 | 9570 | 1320 | 19140 | 125 | 4.92 |
200 - 08 | 12 | -8 | 1/2 | 13.5 | 0.53 | 23.0 | 0.91 | 275 | 3987 | 550 | 7974 | 1100 | 15950 | 180 | 7.09 |
200 - 10 | 16 | -10 | 5/8 | 16.7 | 0.66 | 26.2 | 1.03 | 250 | 3625 | 500 | 7250 | 1000 | 14500 | 205 | 8.07 |
200 - 12 | 19 | -12 | 3/4 | 19.8 | 0.78 | 30.1 | 1.19 | 215 | 3117 | 430 | 6234 | 860 | 12470 | 240 | 9.45 |
200 - 16 | 25 | -16 | 1 | 26.4 | 1.04 | 38.9 | 1.53 | 165 | 2392 | 330 | 4784 | 660 | 9570 | 300 | 11.81 |
200 - 20 | 31 | -20 | 1 1/4 | 33.0 | 1.30 | 49.5 | 1.95 | 125 | 1812 | 250 | 3624 | 500 | 7250 | 420 | 16.54 |
200 - 24 | 38 | -24 | 1 1/2 | 39.3 | 1.55 | 55.9 | 2.20 | 90 | 1305 | 180 | 2610 | 360 | 5220 | 500 | 19.69 |
200 - 32 | 51 | -32 | 2 | 52.0 | 2.05 | 68.6 | 2.70 | 80 | 1160 | 160 | 2320 | 320 | 4640 | 630 | 24.80 |
Main Applications:
Medium to high pressure hydraulic application
Fully Meets or Exceeds the Following Specifications:
- SAE 100R2 AT
- EN 853 2SN
- ISO 1436-1 2SN / R2AT
Hose Construction:
Inner Tube: Oil and water resistant synthetic rubber
Reinforcement: Two layers of high tensile steel braid
Cover: Oil, abrasion and weather resistant synthetic rubber
*Hose Cover Options are available, see the table below
Temperature Range:
-40°F / +212°F
-40°C / +100°C
Intermittent Service:
-40°F / +257°F
-40°C / +125°C
Literature and Reference Materials:
Compliance, Certifications, & Safety:
Note:
Not all sizes stocked at all times. Some specifications may vary. Please inquire about availability. ProPulse reserves the right to make any engineering or material changes at any time to our products for enhancement, performance, and quality.
Hose Cover Options for the 200 Series:
FEATURE | STANDARD | ROCK | SHIELD |
---|---|---|---|
WEAR AND ABRASION RESISTANCE WHEN COMPARED TO EN/ISO REQUIREMENTS | IMPROVED | VERY HIGH | ULTIMATE |
OZONE RESISTANCE COMPARED TO EN/ISO REQUIREMENTS | IMPROVED | VERY HIGH | OUTSTANDING |
EMBOSSED LAY LINE (RUBBER) FOR PERMANENCE | ✓ | ✓ | |
QUALITY CONTROL TRACEABILITY ON EACH HOSE/ASSEMBLY | ✓ | ✓ | ✓ |
FLAME RETARDANT | ✓ | ✓ | |
MSHA APPROVED COVER IS STANDARD | ✓ | ✓ | ✓ |
SALT WATER AND WEATHER RESISTANT | ✓ | ✓ | |
ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE) PROTECTION | ✓ |