1sc Series
compact Rubber Hydraulic Hose
1sc Series | Hose Size | Hose I.D. (Max) | Hose O.D. (Max) | Working Pressure | Proof Pressure | Burst Pressure | Bend Radius | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ProPulse Hose Part Number | DN | Dash | Inch | MM | Inch | MM | Inch | BAR | PSI | BAR | PSI | BAR | PSI | MM | Inch |
1SC - 04 | 06 | -04 | 1/4 | 6.9 | 0.27 | 13.5 | 0.53 | 225 | 3262 | 450 | 6524 | 900 | 13050 | 75 | 2.95 |
1SC - 05 | 08 | -05 | 5/16 | 8.5 | 0.33 | 14.5 | 0.57 | 215 | 3117 | 430 | 6235 | 860 | 12470 | 85 | 3.35 |
1SC - 06 | 10 | -06 | 3/8 | 10.1 | 0.40 | 16.9 | 0.67 | 180 | 2610 | 360 | 5220 | 720 | 10440 | 90 | 3.54 |
1SC - 08* | 12 | -08 | 1/2 | 13.5 | 0.53 | 20.4 | 0.80 | 160 | 2320 | 320 | 4640 | 640 | 9280 | 65 | 2.56 |
1SC - 10* | 16 | -10 | 5/8 | 16.7 | 0.66 | 23.0 | 0.91 | 130 | 1885 | 260 | 3770 | 520 | 7540 | 75 | 2.95 |
1SC - 12* | 19 | -12 | 3/4 | 19.8 | 0.78 | 26.7 | 1.05 | 105 | 1522 | 210 | 3045 | 420 | 6090 | 90 | 3.54 |
1SC - 16* | 25 | -16 | 1 | 26.4 | 1.04 | 34.9 | 1.37 | 88 | 1276 | 176 | 2552 | 352 | 5104 | 114 | 4.49 |
Main Applications:
- Low to medium pressure lines that require tight bend radius
Hose Construction:
Inner Tube: Oil resistant synthetic rubber
Reinforcement: One layer of high tensile steel braid
Cover: Oil, abrasion and weather resistant synthetic rubber
*Hose Cover Options are available, see the table below
Fully Meets or Exceeds the Following Specifications:
- EN 857 1SC
- ISO 11237-1 1SC
- Meets ISO 18752 for half bend radius*
*Hoses as noted above meets or exceeds ISO 18752 requirements for 7 MPa type AC hose
Temperature Range:
-40°F / +212°F
-40°C / +100°C
Intermittent Service:
-40°F / +257°F
-40°C / +125°C
Literature and Reference Materials:
Compliance, Certifications, & Safety:
Note:
Not all sizes stocked at all times. Some specifications may vary. Please inquire about availability. ProPulse reserves the right to make any engineering or material changes at any time to our products for enhancement, performance, and quality.
Hose Cover Options for the 1SC Series:
FEATURE | STANDARD | ROCK | SHIELD |
---|---|---|---|
WEAR AND ABRASION RESISTANCE WHEN COMPARED TO EN/ISO REQUIREMENTS | IMPROVED | VERY HIGH | ULTIMATE |
OZONE RESISTANCE COMPARED TO EN/ISO REQUIREMENTS | IMPROVED | VERY HIGH | OUTSTANDING |
EMBOSSED LAY LINE (RUBBER) FOR PERMANENCE | ✓ | ✓ | |
QUALITY CONTROL TRACEABILITY ON EACH HOSE/ASSEMBLY | ✓ | ✓ | ✓ |
FLAME RETARDANT | ✓ | ✓ | |
MSHA APPROVED COVER IS STANDARD | ✓ | ✓ | ✓ |
SALT WATER AND WEATHER RESISTANT | ✓ | ✓ | |
ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE) PROTECTION | ✓ |