What Should I Look for in an Airless Paint Spray Hose?

Choosing the right airless paint spray hose involves more than just finding one that connects to your sprayer.

A paint hose is constantly put to work. It may be dragged across concrete, pulled around corners, exposed to paints and solvents, coiled and uncoiled repeatedly, and subjected to thousands of PSI during operation. Over time, these conditions take a toll on the hose.

When comparing airless paint spray hoses, it’s important to look beyond price and consider the features that can affect performance, durability and longevity. Pressure rating, hose size, abrasion resistance, chemical and solvent resistance, and manufacturing quality should all play a role in choosing the right hose.

Knowing what to look for will help you choose a hose that not only works with your equipment but is built to withstand the demands of everyday painting.

Start With the Right Specs.

The first step in selecting a paint spray hose is making sure the hose matches your airless sprayer.

Start with the basics:

Pressure rating
Hose diameter
Length
Fittings

A hose that isn’t properly rated or compatible with your equipment can affect performance and more importantly, safety.

Pressure Rating

Airless paint sprayers operate at high pressure, so the hose needs to be rated appropriately for the system it will be used with.

UBERFLO™ by ProPulse® airless paint spray hose is rated to 3,300 PSI, making it suitable for most professional airless spraying applications.

Hose Diameter

Diameter can affect material flow and how the hose feels during use.

1/4-inch hose is a common choice for many airless painting applications. Its smaller diameter makes it easier to handle and maneuver around a jobsite.

3/8-inch hose provides a larger flow path and may be preferred for applications that require greater material volume or longer hose runs.

UBERFLO is available in both 1/4-inch and 3/8-inch diameters.

Hose Length

Longer isn’t always better.

A longer hose gives you more freedom to move around a jobsite without relocating the sprayer, but it also means more hose to manage, drag and store, and could cause unwanted pressure loss. Choose a length that gives you the reach you need without adding unnecessary bulk.

UBERFLO is available in 25-foot and 50-foot lengths, allowing users to choose the combination that best fits their equipment and typical working area.

Fittings

Confirm the fittings on the hose match your sprayer, spray gun and accessories.

UBERFLO 1/4-inch hose uses 1/4-inch female NPSM fittings on both ends, while the 3/8-inch version uses 3/8-inch female NPSM fittings on both ends.

Taking a few minutes to verify these basic specifications can help ensure you’re starting with a hose that fits your equipment and your application.

But once the specifications are right, there’s another factor that can have an even bigger impact on how well a hose holds up on the job: abrasion resistance.

Why Abrasion Resistance Matters. A Lot.

On a typical jobsite, paint hose might be:

Dragged across concrete, gravel or other rough surfaces
Pulled around corners or doorjambs
Rubbed against scaffolding or equipment
Stepped on or run over
Coiled and uncoiled
Pulled across sharp stair treads
Moved repeatedly throughout the day

Over time, this can deteriorate the cover, which is the hose’s first line of defense against the working environment. As that cover wears down, the hose becomes more vulnerable to additional damage and ultimately can lead to failure. A hose cover with strong abrasion resistance can better withstand the repeated dragging and rubbing that comes with everyday use.

UBERFLO features a fully bonded cover engineered for superior abrasion resistance. The cover is strongly bonded to the hose reinforcement rather than simply acting as a loose outer layer. This allows the cover to maintain its integrity for much longer than many competitor hoses and thereby extends the usable hose life which lowers cost of ownership over time.

Chemical and Solvent Resistance Matters Too.

Paints, coatings, solvents and cleaning agents can all come in contact with the hose during normal use. Over time, repeated chemical exposure can affect the hose materials leading to softening, swelling, delamination and separation of the outer cover.

A hose cover designed to resist common chemicals and solvents will last longer even through repeated use and cleaning.

UBERFLO’s fully bonded cover was built to withstand the degradation that occurs from maximum exposure to commonly used chemicals and solvents. When competitor hoses crinkle, separate and swell, UBERFLO remains intact.

The long-term durability of a hose that is resistant to chemicals and solvents is a feature that should not be overlooked.

Made in the USA = Control & Quality.

Where a hose is manufactured can tell you a lot about the product – from the level of control in the manufacturing process to the quality of raw materials used to the standards of testing applied to validate the integrity of the product.

For professional paint contractors, consistency matters. A paint spray hose needs to perform reliably under pressure, withstand repeated use and meet the specs for which it was designed. That makes manufacturing quality an important consideration.

UBERFLO™ airless paint spray hose is manufactured and assembled in Peosta, Iowa, using the same ProPulse quality standards applied across our high-pressure hose products.

Manufacturing hose in the USA gives ProPulse greater control over materials, manufacturing processes, testing and final assembly. It also allows our team to monitor and make adjustments as the product progresses through production and into shipment.

Putting It All Together.

Choosing the right airless paint spray hose comes down to more than price or just finding a hose that fits your sprayer. The right specifications matter. But other factors can significantly affect the longevity, durability and ultimate value of the hose.

That means when you’re evaluating a new hose for your airless paint sprayer, you should consider:

Pressure rating
Diameter
Length
Fittings
Abrasion resistance
Chemical and solvent resistance
Manufacturing location

UBERFLO™ checks all the right boxes.

Rated to 3,300 PSI, available in 1/4-inch and 3/8-inch diameters and 25- and 50-foot lengths, and Made in the USA, UBERFLO gives professional painters (and DIYers too!) the options they need while delivering the durability they should expect from a high-pressure paint spray hose.

Thanks to its fully bonded cover, engineered for superior abrasion resistance and long-term resistance to chemicals and solvents, UBERFLO is a paint spray hose built for the long haul.

To purchase UBERFLO™ visit: ProPulse Paint Spray Hoses on Amazon

For more information, visit: https://www.powermovingforward.com/uberflo-products/